Form Center

By signing in or creating an account, some fields will auto-populate with your information and your submitted forms will be saved and accessible to you.

Pre-Application Submittal and Data Sheet

  1. Instructions to Applicant

    The following application form is provided for all persons who propose to file for approval of a project with the City of Palmdale. These projects will be reviewed by the Development Advisory Board (DAB). The applicant must complete the attached from as prescribed and incorporate all requested information before the application is accepted for processing by the Planning Division. NOTE: ALL PLAN SHEETS SHALL BE INDIVIDUALLY FOLDED BY PLAN TYPE BY APPLICANT TO A MAXIMUM 8½” x 11” SIZE. STACK-FOLDED, STAPLED, ROLLED, OR BOUND PLANS WILL NOT BE ACCEPTED.

  2. Pre-Application Submittal Checklist*

  3. * Note:

    A vicinity map at a scale clearly indicating the subject parcel(s) and showing the existing major street patterns, adjoining projects, subdivision(s), creeks, railroads, and other significant landmarks within a minimum of one mile of the exterior boundaries of the site on 8½” x 11” paper. NOTE: Thomas Guide maps are not acceptable.

  4. ** Note:

    See Submittal and Contents Requirements for all Pre-Applications

  5. Pre-Application Data Sheet:

  6. acres

  7. number lots

  8. number detention basin lots

  9. (number) (define) other lots

  10. Types of lots:

  11. acres

  12. Types of uses:

  13. Please Specify

  14. Feet

  15. Street Name

  16. Feet

  17. Street Name

  18. Applicant:

  19. Owner:

  20. Engineer/Representative:

  21. Submittal and Contents Requirements for all Pre-Applications:

    The following minimum information should be shown on exhibits. NOTE: ALL PLAN SHEETS SHALL BE INDIVIDUALLY FOLDED BY APPLICANT TO A MAXIMUM 8½” x 11” SIZE. STACK-FOLDED, STAPLED, ROLLED, OR BOUND PLANS WILL NOT BE ACCEPTED.

  22. Plot Plan:

  23. 1.

    Legend: Scale, north-arrow, name and phone number of applicant, address of project, name, address, and phone number of person preparing the plan.

  24. 2.

    A Vicinity Map of the area showing adjoining subdivisions, creeks, railroads, major cross streets and other data sufficient to locate the proposed project in relationship to the surrounding community.

  25. 3.

    Existing and proposed lot lines general contours.

  26. 4.

    Location, dimensions, and use of existing and proposed structures. Show open stairways and other projections from exterior building walls, including entrances and exits, and handicap ramps.

  27. 5.

    Location, height, and materials of all walls and fences.

  28. 6.

    Completely dimensioned layout of traffic/circulation patterns (dimensions of internal driveways, aisles, parking stalls, loading spaces, pedestrian ways, vehicle ingress and egress to buildings). Number of required and proposed parking spaces, including handicap spaces.

  29. 7.

    Location and species of all existing trees on-site.

  30. 8.

    Show all existing uses, structures, walls, fences, grades, and mature trees within 50 feet of project boundary. Additionally, all driveways within 150 feet of subject property shall be shown.

  31. 9.

    General Analysis: Density (residential uses only), lot area, percent of building coverage and area devoted to landscaping on the subject site, or other pertinent statistics.

  32. 10.

    Indicate street pattern of adjacent tracts to assure that streets within proposed tract properly align with off-site streets.

  33. 11.

    Indicate right-of-way width and condition of right-of-way improvements fronting subject parcel or parcels and on adjacent parcels. Curb, gutter, sidewalks, and pavement widths shall be shown.

  34. 12.

    For applications involving uses within existing commercial/industrial centers, all existing uses shall be identified, square footage for each use provided and all existing parking within the center shown on plans.

  35. Building Elevations (if applicable):

  36. 1.

    All principal exterior walls, fences, roof projections, and other structures with height dimensioned.

  37. 2.

    Type of roof and wall materials (finished surface) to be used.

  38. Floor Plans (if applicable):

  39. 1.

    Basic interior layout with use of all rooms labeled.

  40. 2.

    Restaurants and similar uses shall have seating areas and number of seats clearly delineated.

  41. Notification of DAB Meeting

  42. 1.

    Insert the name and address of the person to be notified regarding the date and time of the DAB meeting. If you have more than one person to notify, please fill out extra forms.

  43. 2.

    Insert the location/address of the project.

  44. Electronic Signature Agreement

    By checking the "I agree" box below, you agree and acknowledge that 1) your application will not be signed in the sense of a traditional paper document, 2) by signing in this alternate manner, you authorize your electronic signature to be valid and binding upon you to the same force and effect as a handwritten signature, 3) you may still be required to provide a traditional signature at a later date and 4) you have read and understood all requirements for pre-applications.

  45. Leave This Blank:

  46. This field is not part of the form submission.